|
|
Eenheid |
Prijs
Incl. BTW
|
Voorraad |
Aantal |
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 10 mm
Outer Diameter: 22 mm
Width: 6 mm
|
Artikelnummer: CER-16-0049 |
|
|
|
€ 89,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 15 mm
Outer Diameter: 28 mm
Width: 7 mm
|
Artikelnummer: CER-16-0050 |
|
|
|
€ 89,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 12 mm
Outer Diameter: 24 mm
Width: 6 mm
|
Artikelnummer: CER-16-0058 |
|
|
|
€ 139,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 15 mm
Outer Diameter: 28 mm
Width: 7 mm
|
Artikelnummer: CER-17-0016 |
|
|
|
€ 139,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
|
€ 89,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 17 mm
Outer Diameter: 30 mm
Width: 7 mm
|
Artikelnummer: CER-17-0021 |
|
|
|
€ 89,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 17 mm
Outer Diameter: 26 mm
Width: 5 mm
|
Artikelnummer: CER-17-0022 |
|
|
|
€ 139,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 25 mm
Outer Diameter: 37 mm
Width: 7 mm
|
Artikelnummer: CER-17-0023 |
|
|
|
€ 189,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 9 mm
Outer Diameter: 20 mm
Width: 6 mm
|
Artikelnummer: CER-17-0025 |
|
|
|
€ 89,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 15 mm
Outer Diameter: 24 mm
Width: 5 mm
|
Artikelnummer: CER-17-0026 |
|
|
|
€ 139,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 12 mm
Outer Diameter: 21 mm
Width: 5 mm
|
Artikelnummer: CER-21-0055 |
|
|
|
€ 89,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 12 mm
Outer Diameter: 24 mm
Width: 6 mm
|
Artikelnummer: CER-21-0056 |
|
|
|
€ 89,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 15 mm
Outer Diameter: 24 mm
Width: 5 mm
|
Artikelnummer: CER-21-0057 |
|
|
|
€ 89,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 15 mm
Outer Diameter: 26 mm
Width: 7 mm
|
Artikelnummer: CER-21-0058 |
|
|
|
€ 89,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 17 mm
Outer Diameter: 28 mm
Width: 7 mm
|
Artikelnummer: CER-21-0059 |
|
|
|
€ 89,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 18 mm
Outer Diameter: 30 mm
Width: 7 mm
|
Artikelnummer: CER-21-0060 |
|
|
|
€ 89,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
All CeramicSpeed Bearings are hand−built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra−smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non−contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
Inner Diameter: 17 mm
Outer Diameter: 30 mm
Width: 7 mm
|
Artikelnummer: CER-21-0061 |
|
|
|
€ 139,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
The CeramicSpeed SLT (Solid Lubrication Technology) Bearing for Rear Suspension Pivots: OPD (Optimized Pivot Design), features a unique combination of an oil−encapsulated solid plastic polymer and stainless−steel materials which results in a self−lubricating, corrosion−resistant, and maintenance−free bearing.
The micropores in the otherwise solid polymer evenly distribute just enough oil to keep the bearing well−lubricated, while also containing sufficient oil for it to be self−lubricating over the lifespan of the bearing – even when ridden in the harshest of conditions.
The CeramicSpeed SLT OPD Bearing is designed, developed, and hand−built in Denmark and comes with a lifetime warranty.
|
Artikelnummer: CER-23-0033 |
|
|
|
€ 80,01
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
The CeramicSpeed SLT (Solid Lubrication Technology) Bearing for Rear Suspension Pivots: OPD (Optimized Pivot Design), features a unique combination of an oil−encapsulated solid plastic polymer and stainless−steel materials which results in a self−lubricating, corrosion−resistant, and maintenance−free bearing.
The micropores in the otherwise solid polymer evenly distribute just enough oil to keep the bearing well−lubricated, while also containing sufficient oil for it to be self−lubricating over the lifespan of the bearing – even when ridden in the harshest of conditions.
The CeramicSpeed SLT OPD Bearing is designed, developed, and hand−built in Denmark and comes with a lifetime warranty.
|
Artikelnummer: CER-23-0034 |
|
|
|
€ 80,01
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|
|
|
|
€ 139,00
Brutoprijs |
|
Korting |
|
Bijstelling |
|
Nettoprijs |
|
|
|
|
|